Selection Electric Multifunctional Oil Lubrication Pump (DNB-K)

Product Description

This is a Lubrication product that can be applied to the Lubrication system in small and middle machinery. It has a nice appearance due to a compact structure. The components of the pump can be taken down separately because of its single-module structure. We adopt auger-type oil board as the oil-pushing device to achieve forcibly absorbing effect. Due to the multifunctional design, this Selection pumps can be applied to many working surroundings and many working demands.

The power source of the pump can be DC24V, three phase of AC380V, or domestic load of AC220V. When three phase of AC380V adopted, if there is a own program-controlled device in the pump, the power should be three phase and four lines, namely one more null line added; If there is no program-controlled device, the power just need three phase and three lines.

The program-controlled device can be optionally installed in this pump no matter what kind of power is adopted. The device can control the working time, stopping time, and manual running by program.

The number of the oil outlets can be one to four. When there is just one oil outlet, it is a single-line pump, in which an independent integrated package, a pressure gauge and a relief safety valve are installed so as to observe and protect the pump. When it is a multipoint pump, we install a relief safety valve on every component to guarantee the safety of the corresponding pipe.

Type	Nominal displacement	Nominal pressure	Oil-supply mouth	Cubage	Diameter of oil-out pipe	Weight	Motor’s parameters	Time range of electronic program control
	ml/min	MPa	PCS	L	mm	kg		h.m.s
DNB-K/*C	10	16	1~4	4	Φ 6 Φ 8	12	I-DC24V 120W	99h 59m 59s
							II-AC220V 60W
							III-AC380V 60W (three phase and three lines )
							IV-AC380V 60W (three phase and four lines )